08-08-2021, 01:01 PM
Today, I noticed that my L1-L2 120V and 240V indicator lights on the primary electrical panel were off even though I was plugged into shore power. The dash "Shore Power" light was on and the meter's were reading 120V on both L1 and L2.
Starting the Generator and letting it transfer garnered me all the light on properly.
The only thing that is ODD is I am using adapters to go from the 50 AMP 240V shore power cord down to a measly 15 AMP regular extension cord plug (albeit a heavy duty one) Polarity is OK.
I just received the 50 AMP 240V receptacle and will be wiring that up next week, but until then....any reason the lights aren't working?
Thanks,
Starting the Generator and letting it transfer garnered me all the light on properly.
The only thing that is ODD is I am using adapters to go from the 50 AMP 240V shore power cord down to a measly 15 AMP regular extension cord plug (albeit a heavy duty one) Polarity is OK.
I just received the 50 AMP 240V receptacle and will be wiring that up next week, but until then....any reason the lights aren't working?
Thanks,
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan