07-30-2021, 09:07 PM
OK A little bit more info.
The Cyberdyne gauge is toast. I opened up the gauge and most of the circuitry is melted and SMD based, so no fixing that easily.
I will check the indicator light power feed at the last 2 terminals in the AH bay. I have a feeling the panel mount indicator light is toast. I found replacements (I think) They are made by SOLICO and come in RED and AMBER I ordered 5 of each.
Some of my indicator lights have spade terminals some have wire pigtails are they all 14V or are some NEON 120v?? I am pretty sure the shorepower ones for 120v and 240v L1 and L2, Polarity, Generator up front are NOT 14V...
Also the one for the Generator switch by the bed is that one 14V?
I will get this all working!
Any info is much appreciated.
Don't want any of the magic smoke to escape!
The Cyberdyne gauge is toast. I opened up the gauge and most of the circuitry is melted and SMD based, so no fixing that easily.
I will check the indicator light power feed at the last 2 terminals in the AH bay. I have a feeling the panel mount indicator light is toast. I found replacements (I think) They are made by SOLICO and come in RED and AMBER I ordered 5 of each.
Some of my indicator lights have spade terminals some have wire pigtails are they all 14V or are some NEON 120v?? I am pretty sure the shorepower ones for 120v and 240v L1 and L2, Polarity, Generator up front are NOT 14V...
Also the one for the Generator switch by the bed is that one 14V?
I will get this all working!
Any info is much appreciated.
Don't want any of the magic smoke to escape!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan