07-11-2021, 03:49 PM
Rick, I don't remember where the temp sender is located on the aquahot. But I replaced the gauge on my '98 Newell and on my Foretravel I added a temp sender and just pushed it behind the plate where the thermostats are as shown on Mark's post.
Look at the wires at the gauge and see if they're the same as the 2 cut wires in your picture. You can cut the 2 wires at the gauge and twist them together then check the continuity at the 2 cut wires to see if they're the same. If so you can do like I did and add a new sender and possibly new gauge. Pretty much any temp sender with a range up to 250º would work.
Look at the wires at the gauge and see if they're the same as the 2 cut wires in your picture. You can cut the 2 wires at the gauge and twist them together then check the continuity at the 2 cut wires to see if they're the same. If so you can do like I did and add a new sender and possibly new gauge. Pretty much any temp sender with a range up to 250º would work.
Forest & Cindy Olivier
1987 log cabin
2011 Roadtrek C210P
PO 1999 Foretravel 36'
1998 Newell 45' #486
1993 Newell 39' #337