07-11-2021, 11:14 AM
Hey All,
I am troubleshooting/rebuilding my aquahot system and the rain has put a damper on the outside work.
Like most of you, I have a Cyberdyne red LED round gauge over the microwave that reads out the Aquahot temperature. Trouble is, mine is off.
I have some unconnected wires in the Aquahot bay, that may be the culprits, but have no idea which ones feed that gauge. I know there should be a temp sensor someplace on/in the Aquahot unit and some way to feed power to the gauge.
Anyone know which wires are which? This is a particularly Newell problem.
Thanks!
I am troubleshooting/rebuilding my aquahot system and the rain has put a damper on the outside work.
Like most of you, I have a Cyberdyne red LED round gauge over the microwave that reads out the Aquahot temperature. Trouble is, mine is off.
I have some unconnected wires in the Aquahot bay, that may be the culprits, but have no idea which ones feed that gauge. I know there should be a temp sensor someplace on/in the Aquahot unit and some way to feed power to the gauge.
Anyone know which wires are which? This is a particularly Newell problem.
Thanks!
Be seeing you,
Rick Miller
#423
1996, 45'+, Non-slide, Series 60, ABS, 1.5 Bath, Reverse Floorplan