[TMCopeland]

Finished my shakedown trip home, a short 2300 mile trip.  When I left my water pressure was fine.  I needed to add some water to my tank and finally figured out how to do it properly with the automatic fill.  After that it has not functioned properly.  I don’t have sufficient pressure to properly flush the toilet which is quite a nuisance as you can imagine.  Also it seems that my water is now coming directly from the AquaHot as it is hot no matter whether cold or hot faucet is used - painfully hot.  The pump also seems to run excessively and since it isn’t developing proper pressure I just turn it off until I need some.  I welcome any suggestions.

I did check the solenoid on the outflow side of the pump and it did not appear clogged.

All the water now in the tank is the horribly hard stuff from the southwest.  New filters in the system but didn’t have a softener in line.

Thanks,
Terry