[mycbarnes]

Our Microphor toilet was not cycling correctly, the flapper valve only staying open for about 1 second. I removed the air & water sequence valve and installed an overhaul kit. Well, that did not make any difference and with closer inspection I found that air was leaking at the base area of the sequence valve. There is a hairline crack running between the 2 threaded port holes for the 2 bottom air lines, it is very hard to see and could only be found with soapy water and while having the valve partially removed from toilet and leaving some air lines connected to test. Mullaney sells an air & water sequence valve body #39386 but not yet confirmed by Mullaney that this body will work on a LF210 by just swapping parts from the old valve and overhaul kit. He wasn't sure about an internal check valve. So my question is, has anyone used valve body 39386 on a LF210? Or as a long shot, does anyone have a older style black body like mine they would sell? Picture has pen pointing to crack area and what my valve looks like.
Thanks!