[ACR]

I haven't had to rebond anything yet but the automotive industry has moved into adhesives and aluminum repair . The panel bond 8115 is the bonding agent that I will use for delam problems it has glass beads that prevent over squeezing the addhesive out. 3M instructions are to clean back to bare metal wipe with alpurpose adhesive remover coat both sides with a thin layer attach both move it in place apply as Manny clamps as possible let sed for 4 to 6 hrs remove clamps and install 12 to 15 hrs later. you can't squeeze it to much the glass beads in the mix prevent that. This product has been used for years on steel and now on aluminum and sometimes used instead of welding certain pinch welds .Although you can't weld thru it but next to it .