09-13-2019, 10:09 AM
Gurus,
Just to follow up on this thread. Lots of good suggestions. I almost ended up going with the Label maker technology, but in the end I removed the remote hour meter and replaced with a resetable (manual) version.
It turns out that the remote meter was driven from 12VDC. That is kinda surprising. I guess there is a 12V “I’m working” signal coming from the generator controller.
Since the meter I got was a 120VAC model, I tapped into the neon light above the driver.
See pictures.
Bill
Just to follow up on this thread. Lots of good suggestions. I almost ended up going with the Label maker technology, but in the end I removed the remote hour meter and replaced with a resetable (manual) version.
It turns out that the remote meter was driven from 12VDC. That is kinda surprising. I guess there is a 12V “I’m working” signal coming from the generator controller.
Since the meter I got was a 120VAC model, I tapped into the neon light above the driver.
See pictures.
Bill
Bill Johnson
Birmingham, Alabama