[Wardworks]

Well I thought I was done but now I'm in need of some help with the wiring connections, specifically the 2 wires on the solenoid attached to the bottom of the water separator, the 2 wires on the solenoid attached to the block below the pressure switch and the 2 wires coming from the pressure switch. Everything connects to the contactor in the grey box or to each other. The original setup on mine was altered and they cut off the wires when they removed the solenoids. I'm trying to put it back the way it was. I have all new parts I just need help with the wiring. Anyone having the 2 solenoid setup the wiring should be the same as what I have... Any help would be greatly appreciated!