[Rongripon]

Hello all,

Turning my attention to the Howard Power Center - Steering stabilizer.

As I bough the coach, the system is inoperable. On the inside, the light is On on the switch but no air on the gauge.
I believe it is shut down from below. I do not see any hydraulic fluid in the sight tube, has a little in the reservoir. Don't hear any air leak around it.

I know that the company is defunct and nobody services them. There must be a reason the system was shut down and no air is coming to it. They are known to leak. If there was an old leak, I do not see it anymore so I would start blind.....

The question.....worth trying to revive it, see what is wrong, spend money finding out it needs parts that are no longer available ?... Or remove it completely from the coach ?

The "dead" cylinder is attached to the steering and I am thinking that it can not be a good thing to have something there that just adds to the effort of steering and wear to it....

I have driven many miles on different coaches with tag. The Newell tracks well with the Howard inoperable. If it were to work, I am sure it would be a good thing and an improvement.

So either fix it or remove it.....Any advice ?

I have one also. I'm trying to make it work but find any parts is almost impossible..if you decide to junk it, let me know.