01-07-2019, 07:04 AM
I’ve had mine done at Newell. Mine has all the swirls in plexiglas so it was probably more difficult.
If you take the screws out of the top of the valance, and remove it, you can see how they made the ceiling. In my case, it was three layers of plywood. (All three were water rotted)
Newell but the new pieces on their CNC machine and reinstalled.
Essentially nothing was reusable so If you tear into the project, expect to have to source everything. Mine has white Naugahyde everywhere except the plastic.
Let me know...I may have some picstures.
If you take the screws out of the top of the valance, and remove it, you can see how they made the ceiling. In my case, it was three layers of plywood. (All three were water rotted)
Newell but the new pieces on their CNC machine and reinstalled.
Essentially nothing was reusable so If you tear into the project, expect to have to source everything. Mine has white Naugahyde everywhere except the plastic.
Let me know...I may have some picstures.
Bill Johnson
Birmingham, Alabama