09-29-2018, 07:04 AM
Mike,
Your burner needs servicing. Cleaning and a new nozzle will solve your issue.
Allowing the burner to sit not used following burner service allows the diesel on the new nozzle to congeal ruining the fine mist spray pattern. This results in some fuel not burning causing white smoke.
Once you service the burner, run it once per month through one heating cycle, period. The burner can go 1, 2, maybe 3 years before needing service again.
A burner that is not seated properly will produce lots of black smoke. Black smoke is more fuel than air due to combustion air leaks around the poorly seated burner.
Hope this helps.
Your burner needs servicing. Cleaning and a new nozzle will solve your issue.
Allowing the burner to sit not used following burner service allows the diesel on the new nozzle to congeal ruining the fine mist spray pattern. This results in some fuel not burning causing white smoke.
Once you service the burner, run it once per month through one heating cycle, period. The burner can go 1, 2, maybe 3 years before needing service again.
A burner that is not seated properly will produce lots of black smoke. Black smoke is more fuel than air due to combustion air leaks around the poorly seated burner.
Hope this helps.
Rudy Legett
2003 Foretravel U320 4010
ISM11 450 hp Allison 4000R
Factory Authorized Aqua Hot Repair Center
Southeast Texas Area