06-25-2018, 10:39 AM
Hello all gurus
Been on this site quite a bit but this is a first time post
My problem 1983 classic engine model VT-350 (903)
Found I was leaking quite a bit of antifreeze to the tune of 5 to 6 gallons every 200 miles
I found the braided hose that has a hole in it due to rubbing on the trans housing....please bare with me as I try to describe location. Looking at VT 903 passenger side , right under the turbo to the right, under what I’m gonna call a linkage bridge is where this hose is installed to a 90 degree fitting and that housing is marked with a bunch of #’s one being 155964 air inlet . The braided hose is a heavy Duty braided 1/2 Diameterabout 2’ long and was connected To a much cheaper thinner hose, located by the trans driver side and heads forward. I lose it as soon as it gets past the battery box underneath the coach.
The question? What is it? Where does it go?
What is the housing under turbo.... fuel pump , governor ?
Thanks in advance.
Been on this site quite a bit but this is a first time post
My problem 1983 classic engine model VT-350 (903)
Found I was leaking quite a bit of antifreeze to the tune of 5 to 6 gallons every 200 miles
I found the braided hose that has a hole in it due to rubbing on the trans housing....please bare with me as I try to describe location. Looking at VT 903 passenger side , right under the turbo to the right, under what I’m gonna call a linkage bridge is where this hose is installed to a 90 degree fitting and that housing is marked with a bunch of #’s one being 155964 air inlet . The braided hose is a heavy Duty braided 1/2 Diameterabout 2’ long and was connected To a much cheaper thinner hose, located by the trans driver side and heads forward. I lose it as soon as it gets past the battery box underneath the coach.
The question? What is it? Where does it go?
What is the housing under turbo.... fuel pump , governor ?
Thanks in advance.