11-05-2017, 06:31 AM
Uh, you might want to look at the wiring diagram on the PennTex site and look at your picture.
http://www.penntexusa.com/PX-32025.pdf
Look carefully at your blue and orange wires.
Let me make you aware of something I found on my 95 and the Penntex Alternator. Although the harness was in place, Newell did not wire it to the voltage reg as shown. I found that one of the wires deadheaded into the harness at the alt, and another one deadheaded at the voltage regulator. I don't know enough about alternators to explain how the alternator still worked, BUT it's something to be aware of IF you install a new voltage regulator.
Not sure why you switched threads on this.
http://www.penntexusa.com/PX-32025.pdf
Look carefully at your blue and orange wires.
Let me make you aware of something I found on my 95 and the Penntex Alternator. Although the harness was in place, Newell did not wire it to the voltage reg as shown. I found that one of the wires deadheaded into the harness at the alt, and another one deadheaded at the voltage regulator. I don't know enough about alternators to explain how the alternator still worked, BUT it's something to be aware of IF you install a new voltage regulator.
Not sure why you switched threads on this.
Richard and Rhonda Entrekin
95 Newell, 390 Ex caretaker
99 Newell, 512 Ex caretaker
07 Prevost Marathon, 1025
Maverick Hybrid Toad
Inverness, FL (when we're home
)