11-04-2017, 11:20 AM
Hi, any advise here would be great!
my power tech genny won't start from any of the remote switches, either the switch above the drivers area, from the silver leaf panel or direct on the genny.
If i hold the switch on it flashes the green light 4 times which states that its not seeing AC, i have no idea what this means!
the oil and water levels are good so i don't think its a safety cut out.
I can hot wire the genny from the solenoid with the stop arm cable tied open to keep it running, it then runs fine and operates correctly. the only problem is i have to leave the coach to start it up and shut it downs it would be much nicer to use the internal switches again!!
any help or direction gratefully received!
thanks
Rob
my power tech genny won't start from any of the remote switches, either the switch above the drivers area, from the silver leaf panel or direct on the genny.
If i hold the switch on it flashes the green light 4 times which states that its not seeing AC, i have no idea what this means!
the oil and water levels are good so i don't think its a safety cut out.
I can hot wire the genny from the solenoid with the stop arm cable tied open to keep it running, it then runs fine and operates correctly. the only problem is i have to leave the coach to start it up and shut it downs it would be much nicer to use the internal switches again!!
any help or direction gratefully received!
thanks
Rob
2008 NEWELL C-15 ZF 1218