01-05-2013, 07:31 PM
Larry,
I would be interested in knowing how you fixed your broken cable that operates the lock on your generator slide. Specifically, were you able to access the lock thru an access door under the generator compartment?
My generator will not completely retract. It stops and hits something solid about 3 inches before it fully retracts.
I think it is hitting the locking mechanism. I think that the locking mechanism has slipped down about 1/2" and the track is hitting the locking mechanism instead of sliding under it and allowing the lock to seat down thru the hole in the channel iron.
Has anyone ever had this problem. If so, I would really like to hear how you fixed it.
I would be interested in knowing how you fixed your broken cable that operates the lock on your generator slide. Specifically, were you able to access the lock thru an access door under the generator compartment?
My generator will not completely retract. It stops and hits something solid about 3 inches before it fully retracts.
I think it is hitting the locking mechanism. I think that the locking mechanism has slipped down about 1/2" and the track is hitting the locking mechanism instead of sliding under it and allowing the lock to seat down thru the hole in the channel iron.
Has anyone ever had this problem. If so, I would really like to hear how you fixed it.
Tuga & Karen Gaidry
2005 Honda Pilot