[Richard]

This is what Ron is referring to. When I replaced the cac and the radiator I had to install the cac first and slide the radiator under the cac. It was obvious that with the cac bolted in place that the radiator was not parallel and evenly spaced from the cac. Hmmm. The cac bolts from
The top, the radiator bolts from the bottom, but if they don't line up then forcing them
To bolt together is going to stress them both.

I noticed a series of tapped 1/4 20 holes in the bottom frame of the radiator. I used ss bolts in the tapped holes as jacking screws and raised the radiator to meet the cac.

So far, so good.