01-04-2013, 11:13 AM
Attached are photos of the installation of my Wineguard SK-3005. The runners under the base are needed to level the antenna base to set flat on the roof. The control cable takes the place of the old power cable, it cannot be cut and connects in the coach to the antenna control box. I located my control in the front so I needed a new hole to house the two signal cables and control cable. The black wire protector material was screwed into the roof and the screws covered with weather proof sealant. Hope this helps.
2001 Newell #579
tow a Honda Odyssey
fun car: 1935 Mercedes 500K replica