[cfree3]

I reread some of the thread.  The statement that the tag bag doesn't inflate in either travel or
Level mode says the travel solenoid is NOT the problem, since air to
Inflate the bag in level mode comes from the raise solenoid not the travel solenoid.

What happened when air was supplied directly to the tag bag?

We apparently have two issues. Our whole rear driver's side does not inflate at all in travel mode. Flopping the travel solenoids did not make a difference which has led us to believe that our brand new HCV on that side is not working. We have a new one on the way. Personally I think our other issue that the driver side tag bag is not inflating as much as the passenger side tag bag is related to the fact that we have the driver side tag wheel off right now. If we don't have that side of the axle jacked up to be perfectly level with the other side with the wheel on it, then when in lift mode the shapes of the two tag bags could be different based on the height of the axle at the time. My husband is not agreeing with me because he insists that the axle is perfectly level right now. I think it could be off somehat. Air put directly into the bag still has it looking not as inflated as the passenger side. What are other people's thoughts on this? The tag bad does have air in it. He just doesn't think it is inflating as much as the other one. It is hard as a rock but the shape is different. We verified that the tag bags are the same.