07-31-2017, 05:29 PM
That's pretty interesting! It looks like your board had already been modified with a jumper on the back of the board. (first picture). The board looks very similar to mine, but looks "newer". I suspect that the board is repairable. Here is the company that rebuilds them... You might want to contact them. Flight Systems
Since your board already had that jumper wire (before the event)....and failed anyway, maybe there is something in your compressor that is pulling too many amps. This is above my pay grade ....maybe one of the real engineer gurus can chime in with an opinion.
There seems to be problem with the link. Here is another try...Flight Systems
Since your board already had that jumper wire (before the event)....and failed anyway, maybe there is something in your compressor that is pulling too many amps. This is above my pay grade ....maybe one of the real engineer gurus can chime in with an opinion.
There seems to be problem with the link. Here is another try...Flight Systems
Bill Johnson
Birmingham, Alabama