03-07-2017, 10:28 PM
Run the sniffer program and you will find out which gauges yours supports. Among others, you should have road speed, cruise control status, cruise control set speed (I like that one), Accelerator pedal position (%), output torque, engine oil pressure, boost pressure, engine coolant temperature, barometric pressure, fuel rate, battery potential (voltage), and engine speed. Seems there are a couple more but I forget offhand. Of course it can derive other items based on the information it can read.
The Silverleaf unit provides information that is much more precise than what the dash gauges read. I use the VMSpc as my primary instruments other than the few it doesn't duplicate such as air pressure readings and transmission temperature. I also set up two re-settable trip displays so I can monitor how many miles I have travel that day and since my last fill-up and how many gallons of fuel I have used since I reset each one.
ON EDIT:
I just found a file I created years ago when I ran VMSpc PID sniffer on my 8V92.
9 Rolling mpg, 10 acceleration, 11 braking, 12 peak acceleration, 84 road speed, 85 cruise status, 86 cruise set speed, 91 accelerator pedal position, 92 % engine load, 93 output torque, 100 engine oil pressure, 102 boost, 108 barometric pressure, 110 coolant temp, 111 coolant level (although I am not sure mine works properly), 168 battery voltage, 174 fuel temperature, 182 trip fuel, 183 fuel rate, 184 inst. fuel economy, 190 engine speed (tach), 247 total engine hours, 250 total fuel consumed, 509 Horsepower, 510 torque.
The Silverleaf unit provides information that is much more precise than what the dash gauges read. I use the VMSpc as my primary instruments other than the few it doesn't duplicate such as air pressure readings and transmission temperature. I also set up two re-settable trip displays so I can monitor how many miles I have travel that day and since my last fill-up and how many gallons of fuel I have used since I reset each one.
ON EDIT:
I just found a file I created years ago when I ran VMSpc PID sniffer on my 8V92.
9 Rolling mpg, 10 acceleration, 11 braking, 12 peak acceleration, 84 road speed, 85 cruise status, 86 cruise set speed, 91 accelerator pedal position, 92 % engine load, 93 output torque, 100 engine oil pressure, 102 boost, 108 barometric pressure, 110 coolant temp, 111 coolant level (although I am not sure mine works properly), 168 battery voltage, 174 fuel temperature, 182 trip fuel, 183 fuel rate, 184 inst. fuel economy, 190 engine speed (tach), 247 total engine hours, 250 total fuel consumed, 509 Horsepower, 510 torque.