[Land Yacht]

The yellow "wire" looks like it could be a vacuum hose.

So Did I fix it by putting back together? Or do I need to do something else for the repair?
Thanks Mike

---

Mike, I used velcro the entire perimeter. You can buy at any sewing supply store, even Walmart. I used the Industrial strength cause more is better right? Actually I think the adhesive is stickier on the Industrial, but when you decide to separate it, start the separation with a blunt knife like a butter knife and slide between the hook and loop pieces. You will NOT just pull it apart.

While you are in there. Look for any burned out bulbs and look at this link   http://newellgurus.com/showthread.php?ti...light=dash

As Dean said that's a vacuum line.

What was your procedure to adhere the Velcro and make sure the dash piece was aligned properly? Example: did you stick Velcro to dash base first, then peel the top Velcro adhesive, and then install the removed piece, or vise versa? Since you clipped the Christmas trees, they did not help with alignment. How did you ensure alignment?