11-29-2016, 08:34 AM
Well I'm glad we have some insight on the compressor issue. You may or may not know the systems came from SCS sealed with no ports for hooking up gauges. That's unfortunate. If you do have someone install test ports, do not allow them to use a "tap" port as the permanent port. They will leak. It's ok to use a tap port to evacuate the system, but install silver soldered ports before putting it all back together.
Still doesn't explain the sporadic behavior of the fans. Poor connection perhaps or a problematic relay.
Common is common, different legs of power all return to the grid on ONE common.
When you get ready to wire in the heavy duty relays, stick to the schematic you already drew.
Still doesn't explain the sporadic behavior of the fans. Poor connection perhaps or a problematic relay.
Common is common, different legs of power all return to the grid on ONE common.
When you get ready to wire in the heavy duty relays, stick to the schematic you already drew.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)