07-29-2016, 05:01 AM
Hi Kevin,
Several of us have had to deal with this issue. I cant find that thread at this time...Some have had the motors rebuilt successfully. One Guru found a similar motor and used parts (end plates I believe)from that motor to replace worn bearings etc on the old motor. My plan is to rework the fan mount within the fan housing to accept an available motor or find a new squirrel cage fan and adapt it to the condenser box as a last resort. Hopefully someone else will find that thread and chime in.
Several of us have had to deal with this issue. I cant find that thread at this time...Some have had the motors rebuilt successfully. One Guru found a similar motor and used parts (end plates I believe)from that motor to replace worn bearings etc on the old motor. My plan is to rework the fan mount within the fan housing to accept an available motor or find a new squirrel cage fan and adapt it to the condenser box as a last resort. Hopefully someone else will find that thread and chime in.
1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.