[RussWhite]

I went to open the engine cover & only the left side latch would unlatch. I had access to the right latch through the right engine access compartment on the right side. I was able to unlatch it using a 3 foot screwdriver. Don't know what I would do if the left side hadn't unlatched as there is no access. Both locks were stiff from lack of lubrication. I saturated both latches with spray lubricant until they worked smoothly. Now it opens & closes easily. Obviously I have neglected lubricating these latches. I offer this as a reminder to others so you don't get stuck with an engine cover that won't open. Also remember there are two grease fittings on the engine cover door.

Hope this helps someone.......................

Done! That was easy. Thanks, Russ