01-15-2016, 07:08 AM
I totally appreciate everyone's help! You guys are the best.
The 1/4" air line off the regulator is indeed the feed line for the air open/close valve for the genset. I have eliminated the air cylinder as it held air tight overnight. I'll replace the regulator & verify with Newell what the regulator setting should be. I assume there is nothing special about this regulator. Anyone have a source?
The 1/4" air line off the regulator is indeed the feed line for the air open/close valve for the genset. I have eliminated the air cylinder as it held air tight overnight. I'll replace the regulator & verify with Newell what the regulator setting should be. I assume there is nothing special about this regulator. Anyone have a source?
Steve Bare
1999 Newell 2 slide #531