09-18-2015, 04:55 PM
the slide locking pin looks like one that is used for the slides. only it is mounted so the pin pushes up into a aluminum block that has a hole in it that is mounted to the generator slide.
the hoses coming off of it are small.
it is in the bottom left corner of the compartment right at the front as you are facing the genny.
if the leak was the genny cylinder, then the lock should be ok. but..not so sure you can manually move the genny out with the hoses capped.
tom
the hoses coming off of it are small.
it is in the bottom left corner of the compartment right at the front as you are facing the genny.
if the leak was the genny cylinder, then the lock should be ok. but..not so sure you can manually move the genny out with the hoses capped.
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH