[Richard]

I had some trouble on my last trip with drivers in the hammer lane not letting me over to pass slower vehicles. A lot of trouble. Just to make sure I was giving a signal with the toad, I got out and looked at the turn signal. The toad was wired with the old school combined tail/blinker setup. It was a hold over from two toads and three coaches ago.

It kind of occurred to me that drivers might reasonably expect the yellow signals to blink on the toad instead of the tail lights. Given the Newell is wired with separate blinkers, it was just a matter of running wire to get the toad blinkers to operate that way.

So, the old school way takes three hot wires. Right, left, and running light.

The separate blinker way requires right left tail and brake. The breakers are right there in the rear electrical panel with easy access.

Maybe it was my imagine, but I did not have nearly as much of an issue getting over after the wiring change.

Just something to think about.