07-29-2014, 06:32 PM
The circuit board in my ATS bit the dust. The only purpose for the board is provide a delay when cranking the gennie. I have bypassed the board so we do have gennie power. But the producer of the box, Todd Engineering is long out of business.
What is Newell using these days for ATS? The reason I ask is that I have only found so far 50 amp transfer switches rated for 70 amps on the neutral leg. Or they state for up to 12kw generator. Do any of you know of a ATS rated for higher?
I just want to see what my options are before either sending the board for repair or replacing the ATS.
Thanks!
What is Newell using these days for ATS? The reason I ask is that I have only found so far 50 amp transfer switches rated for 70 amps on the neutral leg. Or they state for up to 12kw generator. Do any of you know of a ATS rated for higher?
I just want to see what my options are before either sending the board for repair or replacing the ATS.
Thanks!
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)