07-13-2014, 07:40 AM
i replaced the entire squirrel cage blower on both mine. it is a standard grainger dayton assembly. the original on the 90 had brass sleeves instead of bearings and i put on one with ball bearings. did the same for the 02. when setup right, there is no reason to worry about the fan belt and it certainly isnt enough of an issue to spend any time on it just to eliminate the belt.
the motor is a standard one you can get at any electrical motor shop and you can change it your self in an hour or so. not hard. just a little heavy. pretty unusual for that motor to go bad. i would have a electrical motor shop look at it to see what it needs. maybe have it as a spare or fix it.
tom
the motor is a standard one you can get at any electrical motor shop and you can change it your self in an hour or so. not hard. just a little heavy. pretty unusual for that motor to go bad. i would have a electrical motor shop look at it to see what it needs. maybe have it as a spare or fix it.
tom
2002 45'8" Newell Coach 608 Series 60 DDEC4/Allison World 6 Speed HD4000MH