05-04-2014, 04:04 PM
OK so while heading to a TT Park I noticed that the Jake Brake wasn't working-----No Sound when letting off of the throttle.
I have already checked the DC Voltage at the Forward Terminal Strip and Fuse Block as well as the After Terminal Strip----Purple Wire in our case. Checked with the Engine Running and the Switch Off--No Voltage, then the Switch On Voltage (nominal 12 Volts).
Having not had to look into this before I could use some direction on a 6V92 Jacobs Brake.
thanks in advance!
I have already checked the DC Voltage at the Forward Terminal Strip and Fuse Block as well as the After Terminal Strip----Purple Wire in our case. Checked with the Engine Running and the Switch Off--No Voltage, then the Switch On Voltage (nominal 12 Volts).
Having not had to look into this before I could use some direction on a 6V92 Jacobs Brake.
thanks in advance!
Steve & Patti, Bonnie and Tucker
1982 Newell 38' Classic, DD 6V92
cocktails for as many will fit in the site, dinner for as many can sit at the pick-nick table and sleeps 2 since I fixed the couch