03-30-2014, 12:27 PM
Steve mentioned Precision Painting. They are one of the shops in my area that I had in mind. There are others. I can get contact information if you decide to go 600 miles...
If there is ANY corrosion or bubbles under the paint showing up You may need to replace the aluminum. It may be a result of electrolysis caused by the aluminum coming in contact with the steel under-structure.
Another issue I have seen on a repaint is bubbles appearing at the joints where the aluminum siding joins. The new paint "bridges" the gap between the two pieces then when the siding expands the paint loosens over the joint. I'm not sure how to avoid this issue. I would be interested in others observations /solutions to this issue.
If there is ANY corrosion or bubbles under the paint showing up You may need to replace the aluminum. It may be a result of electrolysis caused by the aluminum coming in contact with the steel under-structure.
Another issue I have seen on a repaint is bubbles appearing at the joints where the aluminum siding joins. The new paint "bridges" the gap between the two pieces then when the siding expands the paint loosens over the joint. I'm not sure how to avoid this issue. I would be interested in others observations /solutions to this issue.
1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.