[ccjohnson]

Richard, U-joints all seemed OK tilt knuckle was good. All 4 of the torx bolts way down inside were loose as is indicated in the Youtube videos https://www.youtube.com/watch?v=DqGNc7gE3uo is a link for one of the best videos. I was able muscle the locking plate down to install the "c" clip by using a claw hammer & a splarkplug socket for a fulcrum. Be advised the "c" clip only fits ONE way. one side is thinner than the other. Best to make sure which way it goes before putting locking plate in. Our coach is a '92 and had a GM column. But no one knows for sure which one or what GM vehicles it was used in for parts references. Not sure what you have in your coach. I would definitely recommend for anyone who doesn't do this stuff really often, get hold of some exploded drawings & maybe a video or so to familiarize yourself with how things work together before starting dis-assembly.