01-24-2014, 04:18 PM
Here is some information that will explain that as well as suggestions from the application engineer.
I would strongly recommend you use Sika Aktivator 205 if you choose to go with Sikaflex 552.
As for application, please make sure you apply a triangular shaped bead (achieved by applying with the v-notched nozzle that should be included with the product). This bead is applied to one surface, then the second surface is mated and the bead is compressed between the two substrates to the final thickness which should be between 1/16-1/8". Please make sure you do not spread the bead down to the desired thickness before mating the panel to the frame.
Hope that helps. Russ
I would strongly recommend you use Sika Aktivator 205 if you choose to go with Sikaflex 552.
As for application, please make sure you apply a triangular shaped bead (achieved by applying with the v-notched nozzle that should be included with the product). This bead is applied to one surface, then the second surface is mated and the bead is compressed between the two substrates to the final thickness which should be between 1/16-1/8". Please make sure you do not spread the bead down to the desired thickness before mating the panel to the frame.
Hope that helps. Russ
Russ White
2016 Winnebago Vista LX 30T
#530 ( Sold )
1999 45' Double Slide - Factory upgrade 2004