[BusNit]

It was a Lowe's product. I don't think they sell it anymore (At least in my area) It's a vinyl backed thin stainless covered subway tile. About 1/8" thick. I sanded the laminate and applied contact cement. The vinyl tile is self stick but in my experience, if you want permanent, you need a secondary layer of contact cement on the adjoining surface. It has not moved through all the temperature swings we get in Phoenix.
I used a small table top tile saw to cut them and finished it off with schluter moulding on the exposed edges.

[2BirdDogs]

It was a Lowe's product. I don't think they sell it anymore (At least in my area) It's a vinyl backed thin stainless covered subway tile. About 1/8" thick. I sanded the laminate and applied contact cement. The vinyl tile is self stick but in my experience, if you want permanent, you need a secondary layer of contact cement on the adjoining surface. It has not moved through all the temperature swings we get in Phoenix.
I used a small table top tile saw to cut them and finished it off with schluter moulding on the exposed edges.

Thank you for sharing Simon! 

Paul