Posts: 48
Threads: 13
Joined: Jan 2021
My number 1 a/c started pulling VERY high amps on start up. Enough so my Hughes PowerWatch would shut down. Looked quickly and it went to 62 amps on one leg and shut off completely. Any ideas? I’m not an a/c specialist but am reasonably handy and will go up when weather clears and remove the cover to look for any obvious issue.
Any and all thoughts appreciated. Happy 4th to all.
Thanks,
Terry
Terry Copeland
2007 P2000i
#808
Posts: 5,412
Threads: 255
Joined: Jul 2012
Locked rotor, bad compressor, or dead short.
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)
Posts: 64
Threads: 1
Joined: Jan 2018
The rotor is not turning which I why you are pulling locked rotor amps. Let’s hope for a bad connection burnt wire or blown capacitor when you pull the cover off look at the connections on the compressor and board and check too see if the capacitor is swollen and the connections you could try a capacitor from a working unit and see what happens
John Kosir
712 2004 45-8
Posts: 48
Threads: 13
Joined: Jan 2021
Thanks for the responses. Good news/bad news - it’s raining today so can’t go up for a look but at least it’s cooler. I’ll keep you posted on my findings.
Terry
Terry Copeland
2007 P2000i
#808
