Posts: 1,696
Threads: 123
Joined: Aug 2012
I'm looking for another condenser blower motor. I'm thinking of replacing the whole blower. Can anybody tell me what the CFM rating on the blower is?
1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
Posts: 837
Threads: 50
Joined: Mar 2014
Another possible option would be to mount a couple 12v radiator fans on the coils and then use a relay to turn them on and off. I'm not sure what the noise level would be.
Jon Kabbe
1993 coach 337 with Civic towed
Posts: 1,168
Threads: 28
Joined: Mar 2013
I got one from Graimger. It was not a direct match. Old one was sealed & oil filled. Replacement was open & air cooled. Shaft also had to be cut down in length. But is has been working great.
Posts: 1,696
Threads: 123
Joined: Aug 2012
ccjohnson, Would you have a part #?
1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
Posts: 1,168
Threads: 28
Joined: Mar 2013
Sorry I don't have part number. The AC guy I had work on the unit in Phx called & talked to someone at Newell. Then he took old motor for measurements on housing & shaft dia etc. to get a new motor from Grainger. As my memory serves me he had to also get a "belly band" to go around the motor to get it to mount in the condenser housing.
Posts: 1,696
Threads: 123
Joined: Aug 2012
Thx CC, I searched and found that thread on NG. Another Guru suggested a Dayton 3RCX7 on that thread. I ordered one from ebay. My concern is that it is only 1/10 hp.
(06-15-2018, 05:49 PM)77newell Wrote: Another possible option would be to mount a couple 12v radiator fans on the coils and then use a relay to turn them on and off. I'm not sure what the noise level would be.
Thx Jon,
I would like to stay with the 115 volt if possible. I am searching for a complete 115 squirrel cage fan that will come close to fitting in the box. Since I don't know the CFM of the original fan I am just trying to match outlet size.
1993 Newell (316) 45' 8V92,towing an Imperial open trailer or RnR custom built enclosed trailer. FMCA#232958 '67 Airstream Overlander 27' '67GTO,'76TransAm,'52Chevy panel, 2000 Corvette "Lingenfelter"modified, '23 Grand Cherokee.
(This post was last modified: 06-16-2018, 06:53 PM by
HoosierDaddy.)
