[Wanderman]

Sure... the green/red was high fan and green/wht was low Brown was ground.

[Wanderman]

Here is the completed and working install of the WAY less expensive and slightly better spec heat exchanger Steve and i installed under the Sofa.

Works very well. Though I need a better way to go from 2 1/2" duct (Newell OEM) to the 1.6" outlet ports on the unit.

[Latitude 28]

Nice work guys! Looks great. Can you tell if it is any quieter? For an adapter check this out....https://www.amazon.com/WORKSHOP-Wet-Dry-WS25007A-Universal/dp/B00FX2TGNM/ref=asc_df_B00FX2TGNM&mcid=5734c0adba5c3b13a8804fa6a118a427?tag=bngsmtphsnus-20&linkCode=df0&hvadid=80333185695376&hvnetw=s&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4583932713546105&psc=1

[Wanderman]

Thanks!

After a few days to work in the bearings, I do believe that it's a bit quieter!

I wonder if that adapter would have problems with the heat?

[Latitude 28]

On our coach the front heater has an ABS shroud....last time I was in there and other than a few cracks in the corners (now repaired) it was holding up pretty good. I would think that adapter would be fine. Again great work and if I have to replace mine I'll be reviewing this thread.

[Wanderman]

Do you mean the rectangular box adapter with the hoses coming out? If so, that wouldn't work as the new heat exchanger unit is a dimensioanally smaller rectangle and has 4 round 1.6" ports on the front of the metal face already.