You are not logged in or registered. Please login or register to use the full functionality of this board...


Allison 4000 TCM (Transmission Control Module) Failures
#1

The Allison shop that replaced my Allison 4000 transmission advised me that the old style TCM is guaranteed to fail.  I took that advice and had them replace it.  Apparently the bonding material between the connector and the body of the TCM fails which causes broken connections internally.  That's the way I understood it.  This place is busy with tow trucks dragging in every kind of truck and busses all day and night.  They had TCM's everywhere I looked and said they commonly replace a dozen a day.

If you have that TCM you may want consider that and do your research.
 
Atlantic Detroit Diesel-Allison, Middletown, CT


Attached Files Thumbnail(s)
   

Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling
Reply
#2

Thanks for the heads-up Jim.  I just took a look at mine and it seems to match your new one.  Hope your issues are all solved by now.


Attached Files Thumbnail(s)
   

Rob
2016 Newell #1536

Reply
#3

(06-23-2023, 09:55 AM)RobSC Wrote:  Thanks for the heads-up Jim.  I just took a look at mine and it seems to match your new one.  Hope your issues are all solved by now.
Yes, you are golden.  Only remaining annoyance is the failure of E-Z Steer.

Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling
Reply
#4

Is this the old style looked like?


Attached Files Thumbnail(s)
   
Reply
#5

(06-24-2023, 07:52 AM)afrench Wrote:  Is this the old style looked like?
Yes that is the old style.
   

Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)