Exhaust tip - Printable Version
+- Newell Gurus (https://newellgurus.com)
+-- Forum: Parts is parts (https://newellgurus.com/forumdisplay.php?fid=28)
+--- Forum: Parts info (https://newellgurus.com/forumdisplay.php?fid=29)
+--- Thread: Exhaust tip (/showthread.php?tid=914)
+- Newell Gurus (https://newellgurus.com)
+-- Forum: Parts is parts (https://newellgurus.com/forumdisplay.php?fid=28)
+--- Forum: Parts info (https://newellgurus.com/forumdisplay.php?fid=29)
+--- Thread: Exhaust tip (/showthread.php?tid=914)
Exhaust tip - renewell596 - 07-19-2013
Does anyone out there know a source (other than Newell) for obtaining an exhaust tip for a 99 - 2005 (with detroit diesel)?
It is 6" round out of the muffler and flattens to an oval (rectangle with rounded ends) out the rear of the coach.
I am looking for a source new or used. (see photo)
RE: Exhaust tip - Brad Townsend - 08-21-2013
You might check with Otts truck and auto supply in Yuma Az.
Last year I was able to get a tip for my rig though is is not the same as yours. He may be able to get what you need.
Otts truck and auto supply 1203 S Pacific Ave Yuma, AZ 85365
(928) 783-0113
RE: Exhaust tip - encantotom - 08-21-2013
the oval one like that i suspect was custom made for newell. mine has been replaced with a 6" round one that points down. they are avail at any truck supply place. i think i paid under 20 bucks for mine but dont remember for sure.
i know on my 90, the rectangular exhaust tip was made by newell and they wanted a ton of money for a new one since it was hand fabricated.
tom
RE: Exhaust tip - Fulltiming - 08-26-2013
Tom is certainly correct on the rectangular exhaust tip for the 8V92's during the early 90's. Newell hand made each one and the last time I checked they were closing in on $1,000 to build one. They require considerable effort to construct. Mine had been replaced with a round exhaust that makes about a 80 degree bend. Doesn't look nearly as good but I know that they looked at the cost of replacement and determined that the cheap one looked great!!
RE: Exhaust tip - Richard - 08-28-2013
Facing a similar issue, I fabricated a tip from standard exhaust pipe and painted it with high temp
Flat black paint. Isn't pretty polished SS. But I have about 20
Dollars and some sweat in it
RE: Exhaust tip - qcj - 08-28-2013
Why can't one take a round tip and squeeze the end somehow with a clamp until it is oval? Chappell
RE: Exhaust tip - renewell596 - 08-28-2013
Thank you all for your input. I made one out of stainless by squashing one end into an oval. Looks great. Short money.
Ray 596
RE: Exhaust tip - encantotom - 08-28-2013
hey that is a good idea.
i like the downward pointing of the round tip so it doesnt throw as much soot on our car when we tow it
tom
RE: Exhaust tip - Brad Townsend - 08-29-2013
I had to replace my old pipe with 2 pieces I welded together.
RE: Exhaust tip - rheavn - 08-29-2013
Ray,
Can you post a photo?