Door key blank - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Welcome (https://newellgurus.com/forumdisplay.php?fid=1)
+--- Forum: Please introduce yourself (https://newellgurus.com/forumdisplay.php?fid=70)
+--- Thread: Door key blank (/showthread.php?tid=8186)

---

Door key blank - Tom Gutmann - 10-01-2024

Good morning, I have a 2007 number 802. I need a key blank for the mid entry door. No luck with the factory or the lock manufacture or the local lock shop. Any help would be appreciated. Thanks. Tom.

---

RE: Door key blank - justinn - 10-08-2024

(10-01-2024, 04:22 AM)Tom Gutmann Wrote:  Good morning, I have a 2007 number 802. I need a key blank for the mid entry door. No luck with the factory or the lock manufacture or the local lock shop. Any help would be appreciated. Thanks. Tom.

Hi Tom,

I just went through this very same inquiry. After visiting multiple locksmiths and trying a few "close" cuts, nothing worked. I called up Newell and they were able to order from Bode a new cylinder and 2 keys. I was in Germany until this morning, so I haven't had a chance to open up the box yet. I think the cost was around .115 Newell Bucks... 115 bucks. Here's an excerpt of the email from Cambri...

We do not stock just blank keys, we could order them in from Bode but it comes with a new cylinder as well, this would cost you about $115, with a 3-4 week lead time

Justin

---

RE: Door key blank - Tom Gutmann - 10-08-2024

Thanks I appreciate the help. Tom, from Tulsa.

---

RE: Door key blank - encantotom - 10-08-2024

i have a bode air door. as far as i know all the keys are the same for all the doors.

tom

---

RE: Door key blank - justinn - 10-09-2024

(10-08-2024, 04:47 PM)encantotom Wrote:  i have  a bode air door.  as far as i know all the keys are the same for all the doors. 

tom

I'll run out to the bus today and try to verify if the new keys are the same as the originals. 

Justin

---

RE: Door key blank - encantotom - 10-09-2024

i have an 02 i was in newell one time and asked to get another key for the air door. he said grab one out of the box they are all the same.

tom

---

RE: Door key blank - justinn - 10-09-2024

(10-09-2024, 11:43 AM)encantotom Wrote:  i have an 02  i was in newell one time and asked to get another key for the air door.  he said grab one out of the box they are all the same. 

tom

just verified! You are correct. It appears Bode is just like Kubota, Cat, Deere on the heavy equipment.

It works on my rearmost lock, but not the front.

---

RE: Door key blank - encantotom - 10-10-2024

i never lock mine with the key.

tom

---

RE: Door key blank - justinn - 10-10-2024

(10-10-2024, 06:18 AM)encantotom Wrote:  i never lock mine with the key. 

tom

Agreed. I have only used the lock when working on the air system(fully depleted of air), and I wanted to make sure that the door stayed shut. I just got the keypad kind of working(beeping), but still haven't reset the code as I can't get the reset button to work. Incidentally, the fobs aren't working either. I will try to tackle that this weekend. Fun stuff.

Justin

---

RE: Door key blank - [email protected] - 11-17-2024

(10-10-2024, 07:50 AM)justinn Wrote:  

(10-10-2024, 06:18 AM)encantotom Wrote:  i never lock mine with the key. 

tom

Agreed. I have only used the lock when working on the air system(fully depleted of air), and I wanted to make sure that the door stayed shut. I just got the keypad kind of working(beeping), but still haven't reset the code as I can't get the reset button to work. Incidentally, the fobs aren't working either. I will try to tackle that this weekend. Fun stuff.

Justin

One of my locks are damaged.Can someone tell me how the inside panel should be removed from the door? I am unfamiliar with how Newell typically attaches upholstery panels.
JD

---