POR 15 - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Exterior (https://newellgurus.com/forumdisplay.php?fid=7)
+--- Thread: POR 15 (/showthread.php?tid=8097)

---

POR 15 - Latitude 28 - 08-02-2024

Okay POR-15 experts.  Have a project, not Newell related, but wanted to ask....what is the best way to applied POR-15?

---

RE: POR 15 - Richard - 08-02-2024

Brush or short nap roller. Do not spray. You need an air supplied positive pressure mask to keep from breathing it. Buy small cans. You close the lid once or twice if you place a plastic grocery bag between the can and lid. Without the bag. The lid welds to the can without the bag.

---

RE: POR 15 - HoosierDaddy - 08-03-2024

Steve, I have used a lot of POR 15. All was applied with a brush that I discarded rather than trying to clean. I just completed painting the frame for my '53 Chevy panel truck. I used this product for the first time and found it easier to work with than POR 15.

https://www.eastwood.com/eastwood-rust-encapsulator-plus.html

---