2-1/8” Sway Bar Bushings - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Suspension/Tires/Wheels (https://newellgurus.com/forumdisplay.php?fid=5)
+--- Thread: 2-1/8” Sway Bar Bushings (/showthread.php?tid=7956)

---

2-1/8” Sway Bar Bushings - [email protected] - 04-17-2024

Sent a request to Newell parts to see if they had the bushing for my coach and luckily they did. They sent them out asap. 

Here are the vitals:
Newell part #705722 $91.66 each
Roadmaster part number #205207-10 (on the box they came in from Newell)

Quick search for these on the net comes back with very little info, so they may be difficult to get. Newell said they had 4 in stock when I purchased them and I bought all 4. I am going to make a mold of one of them so I can potentially make the bushings if need be. 

   

   

   

Forgot to add this I found on the bushings when searching the Roadmaster part #

---

RE: 2-1/8” Sway Bar Bushings - Jack Houpe - 04-18-2024

Thats a great idea! Curious how your going to make the mold, that stuff sticks to almost everything but plastic.

---

RE: 2-1/8” Sway Bar Bushings - [email protected] - 04-18-2024

(04-18-2024, 04:01 AM)Jack Houpe Wrote:  Thats a great idea! Curious how your going to make the mold, that stuff sticks to almost everything but plastic.

I will probably try a silicone mold. Have seen some good success with making them. I have some mold release so hopefully that will keep the silicone from sticking to the bushing.

---