Removing glass from Ramco mirror - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: General and or Other Stuff (https://newellgurus.com/forumdisplay.php?fid=16)
+--- Forum: General (https://newellgurus.com/forumdisplay.php?fid=21)
+--- Thread: Removing glass from Ramco mirror (/showthread.php?tid=7745)

---

Removing glass from Ramco mirror - BusNit - 12-18-2023

The passenger side lower glass segment (wide view) no longer is connected to the motor base or something to that effect. Is there a way to remove the glass so I can glue it to the base? I don't think I can get parts from Ramco according to their email.

---

RE: Removing glass from Ramco mirror - HoosierDaddy - 12-18-2023

Simon, The glass of the Ramco mirrors on 316 are glued to the inside frame. I had one apart that didn't have the convex option. I pried the flat mirror off because it was discolored. I bought a new mirror glass from Ramco , fabricated an aluminum plate that is held by screws to the inside frame. I then velcroed the new glass to the aluminum.

---

RE: Removing glass from Ramco mirror - Richard - 12-19-2023

3m adhesive remover

---