1991 shower hot/cold combiner valve. - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Plumbing and fixtures (https://newellgurus.com/forumdisplay.php?fid=9)
+--- Thread: 1991 shower hot/cold combiner valve. (/showthread.php?tid=7289)

---

1991 shower hot/cold combiner valve. - Dystrakti0n - 04-09-2023

I failed to winterize my coach before the cold snap that hit north Texas a couple months ago. The results being a blown water filter, manifold (just replaced with PEX) and the shower head is dripping water eventhough the valve is turned off. Also, the handle refuses to rotate. So my question is, do I need to remove the wall to get to this valve? I'm assuming if so, it's the shower side. Are there hidden screws somewhere or is it all caulking holding it in?

---

RE: 1991 shower hot/cold combiner valve. - ccjohnson - 04-09-2023

You should be able to remove it through a drawer / cabinet space behind that wall. It should be held in place with screws / lag bolts.

---

RE: 1991 shower hot/cold combiner valve. - Dystrakti0n - 04-09-2023

(04-09-2023, 10:24 AM)ccjohnson Wrote:  You should be able to remove it through a drawer / cabinet space behind that wall. It should be held in place with screws / lag bolts.

Thank you for the reply. I found the access panel behind a glued on mirror.

---