You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Air Compressor Setting 8V92TA - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Air Operated Systems and Leaks (https://newellgurus.com/forumdisplay.php?fid=33)
+--- Thread: Air Compressor Setting 8V92TA (/showthread.php?tid=7036)



Air Compressor Setting 8V92TA - [email protected] - 10-20-2022

Is there a pressure adjustment for the engine driven air compressor? Mine just stays on until it bumps up against the relief valve setting at 150psi.


RE: Air Compressor Setting 8V92TA - Tf175 - 10-20-2022

The governor for the compressor is adjustable , but I would think it might be bad if pressure is going that high . I replaced the governor when I rebuilt my compressor , it now has a max of 125 psi . The previous governor was 110/115 . 
It's a Bendix part , located inboard of the air dryer on the '86 . 
Chris