Thetford Sanicon Turbo Macerator Instal Curbside Bay - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Plumbing and fixtures (https://newellgurus.com/forumdisplay.php?fid=9)
+--- Thread: Thetford Sanicon Turbo Macerator Instal Curbside Bay (/showthread.php?tid=5781)

---

Thetford Sanicon Turbo Macerator Instal Curbside Bay - jdkskyking - 11-10-2020

I installed a Thetford Sanicon Turbo Macerator in my curbside AquaHot/Waste Tank bay. When we arrive back home I back the coach into my shop driveway. This addition allows us to dump and rinse our waste tank and send it to the shop’s sewer cleanout. 

The curbside bay has the air controlled dump valve and a 3” pipe the exits the bay through the bottom of the Coach. I plugged the hole with a standard 4” plumbing pipe test plug. The system requires a 12v 30 amp circuit, I modified the Thetford on off switch as you’ll see in the photos. The original Thetford hose sprung a leak on its maiden voyage, a quick call to customer service and the new “sleeved” tube was on the way.

                                                       

I plan to add a pass through for the hose to the bottom of the bay. 

Take care,
JK

---

RE: Thetford Sanicon Turbo Macerator Instal Curbside Bay - encantotom - 11-10-2020

nicely done. my 12v compressor is right in that area.

tom

---

RE: Thetford Sanicon Turbo Macerator Instal Curbside Bay - Richard - 11-10-2020

Great execution!

---