Outback Mate password - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Generators (https://newellgurus.com/forumdisplay.php?fid=25)
+--- Thread: Outback Mate password (/showthread.php?tid=5181)

---

Outback Mate password - mickinuk - 09-26-2019

Is there a default password for the Outback Mate generator control panel (the one above the driver)? To get to the advanced setup screen, the manual shows the password number as 132, but that is incorrect. 

The reason I'm asking is that it seems to have the gen exerciser enabled and I'd instead prefer to control it through the kitchen touchscreen.

---

RE: Outback Mate password - mickinuk - 09-27-2019

I found it in the PSX-240-Relay manual: 141

A follow-on questions. What does the PSX-240-Relay do? It looks like it should take a single-phase input from the inverters (and possible 30A shore power) and produce a dual-phase output. If that were the case the 240V appliances should work, but they don't. So has it another purpose - to connect single-phase to both legs and therefore power any 120V loads, but not power 240V loads (because they are the same phase).

---