Bill Johnsons' flooring - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Documentation (https://newellgurus.com/forumdisplay.php?fid=13)
+--- Forum: Interior Things (https://newellgurus.com/forumdisplay.php?fid=36)
+--- Thread: Bill Johnsons' flooring (/showthread.php?tid=4794)

---

Bill Johnsons' flooring - Ernie - 02-24-2019

Bill and I had been busy doing demo. Found some issues with some rotted floors that will be corrected. He selected some nice hickory and will be installing that after we install some new plywood.

---

RE: Bill Johnsons' flooring - encantotom - 02-24-2019

ernie, you are a true craftsman. make sure you supervise bill enough, he is kind of a goof off.

tom

---

RE: Bill Johnsons' flooring - Ernie - 02-24-2019

does anyone know what the round metal objects are with hex head on the Valid drop down?

---

RE: Bill Johnsons' flooring - Ernie - 02-25-2019

After 4 days off we got back on track. Adding new plywood in place of rot and new underlayment on drop down in salon.

---

RE: Bill Johnsons' flooring - encantotom - 02-25-2019

bill, on my 90 the floor was bad in the same spot. reason was twofold.

1. the sideview mirrors were loose and letting water in through the bolt holes

2. where the fiberglass front cap and metal skin meets, the seal between the two was no longer sealed.

just a thought

tom

---

RE: Bill Johnsons' flooring - bikestuff - 02-25-2019

I have already sealed the cap but will check the mirrors.  Thanks!

---

RE: Bill Johnsons' flooring - Ernie - 02-26-2019

All prep completed. All underlayment installed. I started some new wood in entry.

---

RE: Bill Johnsons' flooring - Jackflash - 02-27-2019

That's going to look good, glad to see you have strict supervision to keep you on task.

---

RE: Bill Johnsons' flooring - Ernie - 02-27-2019

started installation

---

RE: Bill Johnsons' flooring - encantotom - 02-27-2019

glued? tongue and groove as well?

how do you mark the funky curves?

very very nice

tom

---