Exhaust canister/muffler hangers - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Drivetrain (https://newellgurus.com/forumdisplay.php?fid=4)
+--- Thread: Exhaust canister/muffler hangers (/showthread.php?tid=4388)

---

Exhaust canister/muffler hangers - pairodice - 07-24-2018

Anyone know where I might source the two long hangars for the muffler can?  I was going to try to find a place in Atlanta, GA next week to weld up mine or replace them.  
I did figure out that the muffler can be held in place temporarily using the BIG, long plastic Zip Tie wraps (got a bunch from Harbor Freight) - I was surprised they did not melt or break and we drove several hours with them.

---

RE: Exhaust canister/muffler hangers - Guy - 07-24-2018

Yes.

Truckpipeusa.com   will have what you need and a whole lot more. Who new there were companies that specialize in HD muffler hardware...

Regards,

Guy

---

RE: Exhaust canister/muffler hangers - Joe Galowitch - 07-24-2018

(07-24-2018, 07:32 AM)Guy Wrote:  Yes.

Truckpipeusa.com   will have what you need and a whole lot more. Who new there were companies that specialize in HD muffler hardware...

Regards,

Guy

I had the same problem on 469 took them off rewelded and added a piece of steel over the broken piece. Easy job and welder can do.

---